ONIKS-2.6Rebound strength measuring instrument

  pcs.
ADD TO FAVORITES REMOVE FROM FAVORITES
  • Electronic unit with casing (depends on the version):
    • Version 1 – with embedded pyrometer (temperature sensor of concrete surface)
    • Version 2 – without pyrometer
  • Sclerometer (depends on the model):
    • universal model - no letters - (concrete compressive strength range is 1 to 100 MPa)
    • model LB - for lightweight concrete (concrete compressive strength range is 1 to 30 MPa)
    • model VB - for heavy-weight concrete (concrete compressive strength range is up to 150 MPa)
  • Reference control sample
  • USB charger (1А)
  • USB card with PC software
  • USB cable
  • Operating instructions
  • Bag
  • Verification or calibration certificate (on request)

Abrasive stone

Abrasive stone

ADD TO FAVORITES REMOVE FROM FAVORITES

Plastic case for ONIKS-2.6

Plastic case for ONIKS-2.6

ADD TO FAVORITES REMOVE FROM FAVORITES
  • Non-destructive quick control of the compressive strength, uniform quality and strength quality of light, heavy and heavy-weight concrete during technological control and inspection of objects, as well as to control bricks and other building materials
  • Flaw detection of objects, research of the elastic properties
  • Testing of density of composite materials (option)
  • The instrument can be used for inspection of products, analysis of elasto-plastic properties of materials
  • Advanced - ONIKS-2.6 allows to measure the density of composite materials (optional)
  • Advantages and modifications
  • Multi-parametrical method of testing in combination with the adaptive filtering provide more accurate measurements (patent)
  • The lightweight, compact and ergonomic sensor
  • Wide dynamic range and low noise level of the measurement circuit
  • Introduced visualization and integrated analysis of the signal impact response of the test objects
  • Flaw detection of objects according to the spectral characteristics of their impact response signals (computer applications)
  • Spatial and temperature compensation of measurement errors
  • Two versions and three models are built for different purposes in order to meet the specific needs of the customer
  • LEMO connector
  • Measurement of parameters of the sclerometer electrical pulse with filtering and intelligent signal processing (both single and series up to 15 impacts) and their conversion to strength for a given correlation
  • Digitization, visualization, filtering, and statistical signal processing (both single and series up to 15 impacts) to obtain the amplitude, time, integral and spectral characteristics
  • The user is enabled to set correlations for the new materials and the tested object names
  • Archiving of signals, results and measurement conditions (number, type, material, and temperature of the object, date, time,...)
  • USB interface and special service software
Ranges of compressive strength measuring, MPa

1...100
1...30(LB)
3...150(VB)

Limits of permissible general absolute error of compressive strength measurement % ±8
Limits of permissible supplementary absolute error of compressive strength measurement under deviation of operation temperature for each 10 ºС within operating range, in fractions of the general error, maximum ±1,5
Impact energy, J 0,12
Memory, less than, results 2600 х 5
Display resolution 240х320
Dimensions, less than, mm  
 - electronic unit 150x67x21
 - sclerometer Ø30x165
Weight, less than, kg  
 - electronic unit 0,19
 - sclerometer 0,14
  • Data download to PC
  • Data saving, recording and processing
  • Impact graphs viewing
  • Data transfer to Excel spreadsheet, textual documents and other applications

Collect your order in the cart,
and our manager will advise you on the price.