ONIKS-1.OSPullout tester

  pcs.
ADD TO FAVORITES REMOVE FROM FAVORITES
  • Hydraulic press, equipped with electronic unit:
    • ONIKS-1.ОS.050 –load measurement up to 50.0 kN
    • ONIKS-1.ОS.100 –load measurement up to 100.0 kN
  • Anchor:
    • ONIKS-1.OS.050 - ø16x35
    • ONIKS-1.OS.100 - ø16x35, ø24x48
  • Segment (set of 3 pcs.):
    • ONIKS-1.OS.050 - ø16x35
    • ONIKS-1.OS.100 - ø16x35, ø24x48
  • Boring unit:
    • ONIKS-1.OS.050 - ø16 mm
    • ONIKS-1.OS.100 - ø16 mm, ø24 mm
  • Drill jig
  • Open-jaw wrench:
    • ONIKS-1.OS.050 - 19 mm
    • ONIKS-1.OS.100 - 19 mm, 23 mm
  • USB charger (1А)
  • USB card with PC software
  • USB cable
  • Operating instructions
  • Verification or Calibration certificate (on request)

ø16x35 mm anchor

ø16x35 mm anchor

ADD TO FAVORITES REMOVE FROM FAVORITES

ø24x48 mm anchor

ø24x48 mm anchor

ADD TO FAVORITES REMOVE FROM FAVORITES

ø16x35 mm segment (set of 3 pcs.)

ø16x35 mm segment (set of 3 pcs.)

ADD TO FAVORITES REMOVE FROM FAVORITES

ø24x48 mm segment (set of 3 pcs.)

ø24x48 mm segment (set of 3 pcs.)

ADD TO FAVORITES REMOVE FROM FAVORITES

Ø16 mm cordless power boring unit

Ø16 mm cordless power boring unit

ADD TO FAVORITES REMOVE FROM FAVORITES

Ø16 mm boring unit

Ø16 mm boring unit

ADD TO FAVORITES REMOVE FROM FAVORITES

Ø24 mm boring unit

Ø24 mm boring unit

ADD TO FAVORITES REMOVE FROM FAVORITES

Drill jig

Drill jig

ADD TO FAVORITES REMOVE FROM FAVORITES

ONIKS-1.OS.50 Casing

ONIKS-1.OS.50 Casing

ADD TO FAVORITES REMOVE FROM FAVORITES

ONIKS-1.OS.100 Casing

ONIKS-1.OS.100 Casing

ADD TO FAVORITES REMOVE FROM FAVORITES

Plastic case for ONIKS-1.OS.050

Plastic case for ONIKS-1.OS.050

ADD TO FAVORITES REMOVE FROM FAVORITES
  • Utilizes the cut and pull out test method (GOST 22690) for determining of concrete strength during technological control and inspection of objects
  • Can also be used in the non-destructive testing to confirm and correct the calibration characteristics of rebound (ONYX-2.5) and ultrasonic (PULSAR-2) strength testers
  • Optional applications (with extra fixtures and accessories) are available to determine the bonding strengths of brick and stone in masonry, adhesives, the holding force of anchors and fixings in construction materials and other bonding for construction based applications
  • Based on newly introduced innovative technical solutions to significantly improve metrological and performance characteristics due to the excluding of anchor slippage and stabilizing of a pullout cone (patent)
  • Designed to be very compact, lightweight and ergonomical, the tester features two working hydraulic cylinders, connected to the rests, screw fitting of an anchor and a drawbar and self-adjustment of pullout axis to allow simple positioning on testing surface without tilting and slippage, requiring no adjustment and preventing the tester from falling
  • Convenient handwheel for the quick anchor prestressing (with the load up to 5 kN) when positioning on testing surfaces
  • Easy and safe positioning on testing surfaces, especially when testing vertically, conveniently mounted horizontal handle
  • Alarm system of stroke excess for the long-term and safe operation
  • Large safety factor of a design; constructive elements of the tester are made of the high-strength and light materials minimizing its dimensions and weight
  • Built-in electronic unit with highTFT color display and lithium battery of large capacity
  • Two models suitable for various load ranges (up to 50kN and up to 100kN)
  • The mechanical construction as well as the electronics are optimised for work with high-strength concrete: the patented solution allows creating the range of loadings up to 100 kN
  • Two types of boring units available (for routing of a ring recess in a borehole to ensure strong bond between the anchor and a concrete):
  •  – mechanical with the wear-resistant cutter  
  •  – cordless power with the high-speed electric drive and the diamond cutting wheel
  • The new strengthened anchors made of high-strength damask steel feature an enhanced functional reserve
  • Control of speed of loading and its indication on the graphic display with backlight
  • Automatic record of anchor pullout force
  • Calculation of concrete strenght according its type, hardening conditions and anchor standard size, statistical processing of results
  • Setting of calibration characteristics for new materials
  • Up to 800 protocols of measurement in real time
  • Programmable auto-off when not used
  • Russian/English menu availble
  • USB port enables the user to easily download data to a computer and to charge accumulators
  • Special service software
  OS.050 OS.100
Strength measuring range, MPa 5...100 10...150
Pull-out load range, kN 5...50 5...100
Limiting pullout force, kN 65 110
Limits of load measuring error, % ±2 ±2
Dimensions, mm 360х60х175 380х60х200
Weight, kg 3,6 5,4
Anchor standard size, mm (ø x h) 16х35/30 16х35/30
  16х48/38
  24х48 24х48
  • Data download to PC
  • Data saving, recording and processing
  • Data transfer to Excel spreadsheet, textual documents and other applications

Collect your order in the cart,
and our manager will advise you on the price.