ONIKS-1.OS.AAutomatic pullout tester

  pcs.
ADD TO FAVORITES REMOVE FROM FAVORITES
  • Hydraulic press with integrated electronic unit​:
    • ONIKS-1.ОS.060 – load measurement up to 60.0 kN
  • Anchor:
    • ø16x35
    • ø24x48
  • Segment (set of 3 pcs.):
    • ø16x35
    • ø24x48
  • Electric boring unit:
    • ø16 mm, ø24 mm
  • Open-jaw wrench:
    • 19 mm
  • Charger 16,8V (3A)
  • USB charger (1А)
  • USB card with PC software
  • USB cable
  • Operating instructions
  • Verification or Calibration certificate (on request)
  • Case (2 pcs.)

ø16x35 mm anchor

ø16x35 mm anchor

ADD TO FAVORITES REMOVE FROM FAVORITES

ø24x48 mm anchor

ø24x48 mm anchor

ADD TO FAVORITES REMOVE FROM FAVORITES

ø16x35 mm segment (set of 3 pcs.)

ø16x35 mm segment (set of 3 pcs.)

ADD TO FAVORITES REMOVE FROM FAVORITES

ø24x48 mm segment (set of 3 pcs.)

ø24x48 mm segment (set of 3 pcs.)

ADD TO FAVORITES REMOVE FROM FAVORITES

Ø16 mm cordless power boring unit

Ø16 mm cordless power boring unit

ADD TO FAVORITES REMOVE FROM FAVORITES

Ø16 mm boring unit

Ø16 mm boring unit

ADD TO FAVORITES REMOVE FROM FAVORITES

Ø24 mm boring unit

Ø24 mm boring unit

ADD TO FAVORITES REMOVE FROM FAVORITES

Drill jig

Drill jig

ADD TO FAVORITES REMOVE FROM FAVORITES

ONIKS-1.OS.50 Casing

ONIKS-1.OS.50 Casing

ADD TO FAVORITES REMOVE FROM FAVORITES

ONIKS-1.OS.100 Casing

ONIKS-1.OS.100 Casing

ADD TO FAVORITES REMOVE FROM FAVORITES

Plastic case for ONIKS-1.OS.050

Plastic case for ONIKS-1.OS.050

ADD TO FAVORITES REMOVE FROM FAVORITES
  • Utilizes the cut and pull out test method (GOST 22690) for determining of concrete strength during technological control and inspection of objects
  • Can also be used in the non-destructive testing to confirm and correct the calibration characteristics of rebound (ONYX-2.6) and ultrasonic (PULSAR-2) strength testers
  • For the first time, ONIKS-1.OS.060 used innovative technical solutions: a fully automatic measurement cycle was implemented through the use of a high-performance electric drive, anchor slipping was eliminated and the pullout cone was stabilized; significantly improved metrological and operational characteristics (patent)
  • The built-in high-capacity lithium battery provides more than 150 vomits (at an ambient temperature of 25 ° C)
  • Designed to be very compact, lightweight and ergonomical, the tester features two working hydraulic cylinders, connected to the rests, screw fitting of an anchor and a drawbar and self-adjustment of pullout axis to allow simple positioning on testing surface without tilting and slippage, requiring no adjustment and preventing the tester from falling
  • Convenient handwheel for the quick anchor prestressing (with the load up to 5 kN) when positioning on testing surfaces
  • Easy and safe positioning on testing surfaces, especially when testing vertically, conveniently mounted horizontal handle
  • Overrun function
  • Large safety factor of a design; constructive elements of the tester are made of the high-strength and light materials minimizing its dimensions and weight
  • Contrast monochrome OLED display
  • The mechanical construction as well as the electronics are optimised for work with high-strength concrete: the patented solution allows creating the range of loadings up to 60 kN
  • The device is equipped with a specialized boring device with a high-speed electric drive and a diamond cutting element (for the formation of an annular groove in the hole, which ensures reliable fixation of the anchor)
  • The new strengthened anchors made of high-strength damask steel feature an enhanced functional reserve
  • Fully automatic measurement cycle and its indication on the graphic display with backlight
  • Automatic record of anchor pullout force
  • Calculation of concrete strenght according its type, hardening conditions and anchor standard size, statistical processing of results
  • Setting of calibration characteristics for new materials
  • Up to 800 protocols of measurement in real time
  • Programmable auto-off when not used
  • Russian/English menu availble
  • USB port enables the user to easily download data to a computer and to charge accumulators
  • Special service software
Strength measuring range, MPa 5...100
Pull-out load range, kN 5...60
Limiting pullout force, kN 75
Limits of load measuring error, % ±2
Dimensions, mm 343х80х180
Weight, kg 5,9
Anchor standard size, mm (ø x h) 16х35
  24х48
  • Data download to PC
  • Data saving, recording and processing
  • Data transfer to Excel spreadsheet, textual documents and other applications

Collect your order in the cart,
and our manager will advise you on the price.